Logitech Harmony Mode D'emploi page 28

Logitech Harmony remote control unit for Nikobus
ProgrammiNg maNuaL:
Configuration of the Harmony remote control unit. the Harmony 900 is used here as an example.
Your Logitech remote control unit must be configured using the software provided.
For this, you need an Internet connection so that you have access to a database which contains thousands of different devices.
More info and the user manual at www.logitech.com
Quick configuration:
The configuration consists of the following steps (described in detail on the next page):
- Create an account.
- Register your remote control unit.
- Add all devices that will be controlled by your Harmony remote control unit.
o You will find the Nikobus file under 'Home Automation - Light Controller'
• Manufacturer: "Niko"
• Model: "Nikobus"
- Create activities
o An activity can control actions at one or more of the "devices" that you have activated on your remote control unit.
• Create a separate "activity" for each room in which you want to operate the Nikobus installation.
• Assign a name to this activity which indicates in which room this activity will take place, for example, "living room".
• Within each "activity" you can assign infrared commands to the "hard" buttons on the remote control unit or to the "soft" buttons on the touch screen of your
remote control unit (depending on the type of remote control unit that you have). The infrared commands can be found in the "device" database (Nikobus) that
you activated.
• If necessary, create specific activities such as "Watch TV". It is possible to create the following activities in this manner and to activate them with one single
press of a button: switching on the TV, starting the surround system and DVD player, adjusting the lighting to the "TV" atmosphere and closing the curtains.
nv Niko sa
Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@Niko.be — www.niko.be
PHlogitechR10113