Instructions - Roborock S7 Manuel De L'utilisateur

Instructions

Press and hold the button to turn on the robot. The power in-
dicator will turn on, and the robot will enter standby mode. Press
and hold the
cleaning cycle.
Note:
Start Cleaning
Press the button to start cleaning. The robot will plan its route
based on its scan of the room. It then splits each room into
Zone 1 – Cleaned
Zone 4 – Next Zone
Zone 2 – Cleaned
Zone 3 – In Progress
Note:
Cleaning cannot start if the battery level is too low. Allow the robot to charge before start-
ing cleanup.
Before cleaning, tidy cables (including the charging dock power cable) and fragile items
tion or damage to wires and property.
If cleaning is completed within 10 minutes, the area will be cleaned twice.
If the battery runs low during the clean, the robot will automatically return to the charging
If the VibraRise mop cloth mount is attached, the robot will lift the mount to clean carpeted
areas.
Mode Setting
025
-