Roborock S7 Manuel De L'utilisateur page 20

Installation
Power on and charge the robot
3
Press and hold the button to power on the robot. When
the power light goes on, place it on the dock to charge. To
maintain the performance of the high-performance lithium-ion
rechargeable battery pack, keep the robot charged.
Note: The robot may not turn on when the battery is low. In this case, place the robot
directly onto the dock to charge.
The power indicator color
indicates the battery level:
White: Battery level 20%
Red: Battery level < 20%
4
Note:
1. Remove the water tank
Release the water tank latch and slide the tank backward.
2. Fill the water tank
Note:
020