Operation Instruction - GreenWorks ELITE CS-140-T Manuel Du Propriétaire

OPERATION INSTRUCTION

STARTING AND STOPPING THE CHAINSAW
A. To start the chainsaw:
• Make sure chain tension is at desired setting. Refer to adjusting the chain tension in the Care
and Maintenance section of this manual.
• Make sure the chain cover lock knob is tight to the chain cover.
• Make sure no objects or obstructions are in the immediate vicinity which could come in
contact with the bar and chain.
• Fit the battery into the chainsaw.
• Press in the safety lock. This makes the trigger operational.
• Press and hold the trigger, and keep it pressed for continued operation.
B. To stop the chainsaw:
• Release the trigger.
• Upon release of the trigger switch, the safety lock will be automatically reset to the lock
position.
NOTE: It is normal for the chain to coast to a stop once the trigger is released.
15
Safety Lock
Trigger