Advanced Mode - Ecler CA200z Notice D'utilisation

Notes:
The LCD mode adjustment makes it possible to leave the screen on whenever the
CA200z is in ON mode, or for it to be DIMMED or OFF after about 20 seconds of inactivity on the
user controls.
In setup mode, the options of each parameter are displayed intermittently on the LCD
screen
To access the ADVANCED SETUP mode, press and hold the special key combination
MIC1 + MIC2 + front rotary encoder knob:
Front knob SP : Short Press (press the front panel knob briefly, less than 0.5 seconds)
Front knob LP : Long Press (press & hold the front panel knob for more than 2.5 seconds)
SETUP MODE
ADVANCED SETUP MODE
Rotate knob
to browse
options
ADVANCED SETUP mode

ADVANCED MODE

KEY CODE REQUIRED
MIC1 MIC2
+
SP
SAVE PRESET
1 ... 5
Rotate knob
to browse
options
AUTOLOAD PRESET 1
(at every power ON)
Rotate knob
to browse
options
REMOTE1
Rotate knob
to browse
options
REMOTE2
Rotate knob
to browse
options
IR REMOTE
Press and hold MIC1 + MIC2 +
LP
+ front panel knob to enter the
ADVANCED SETUP MODE
PRESET
number
shown in
LP to enter
LCD
LP
the PRESET
SAVE mode
SAVE PRESET
1, 2, 3, 4 or 5
SP to SAVE
SP
and get
back
Status
shown in
LP to enter the
AUTOLOAD
LP
PRESET 1
setup
AUTOLOAD PR 1
ON / OFF
SP to get
SP
back
Mode
shown in
LP to enter
the REMOTE1
LP
control port
setup mode
REMOTE1
VOL + INPUTS
VOL + PRESETS
OFF
SP to get
SP
back
Mode
shown in
LP to enter
the REMOTE2
LP
control port
setup mode
REMOTE2
VOL + INPUTS
VOL + PRESETS
OFF
SP to get
SP
back
Mode
shown in
LP to enter
the Infrared
LP
remote control
setup
IR REMOTE
ON / OFF
SP to get
SP
back
Rotate knob
to select
PRESET
number
Rotate knob
to select an
option
LCD
Rotate knob
to adjust
REMOTE1
control port
working
LCD
mode
Rotate knob
to adjust
REMOTE2
control port
working
LCD
mode
Rotate knob
to enable
or disable
the IR
REMOTE
LCD
control
13