Adjusting The Binoculars; Interpupillary Distance Adjustment - Minox BN 7x50 C Mode D'emploi

3. Tighten the screw cap on the battery com-
partment again by turning it in clockwise
direction.
Fig. 1
32
Fig. 2

Adjusting the binoculars

Before you use your MINOX BN 7x50 C it must
be adjusted to the your individual requirements.
Observe the following steps for correct use.

Interpupillary distance adjustment

Your MINOX BN 7x50 C has a folding bridge
that you can use to adjust the two eyepieces to
the distance between your eyes. Your MINOX
BN 7x50 C is properly adjusted to the interpu-
pillary distance when you can see one round
full circle when you look through your MINOX
binoculars. Adjust your MINOX binoculars until
the two circles are superimposed to form one
full circle.