Publicité
Les langues disponibles
Les langues disponibles
Note: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
Labels on charger and battery pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
100% Battery charging.
100% Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the
environment.
Charge STANLEY battery packs only with
designated STANLEY chargers. Charging battery
packs other than the designated STANLEY
batteries with a STANLEY charger may make
them burst or lead to other dangerous situations.
Do not incinerate the battery pack.
(Original instructions)
Package contents
The package contains:
1 Drill/driver
1 Charger
2 Batteries (C2) or 1 Battery (C1)
1 Instruction manual
Note: Battery packs and chargers are not included with
N-models.
•
Check for damage to the tool, parts or accessories which
may have occurred during transport.
•
Take the time to thoroughly read and understand this
manual prior to operation.
Storage recommendations
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold.
2. Long storage will not harm the battery pack or charger.
Features (Fig. A)
1. Trigger Switch
2. Forward/Reverse Button
3. Torque Adjust Collar
4. Dual Range Gear Selector
5. Keyless Chuck
6. Battery
7. Battery Release Button
8. LED Work Light
9. Bit Tip Holder
Intended use
This drill/driver is designed for light fastening and drilling
applications.
ENGLISH
9
Publicité
