ESAB Mig C240 Manuel D'instructions page 18

ESABMig C240, ESABMig C240s
W. F. Mechanism 0455 890 882
Item Denomination
A Pressure roller
B Feed roller
C Inlet nozzle
D Insert tube
E Outlet nozzle
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for aluminium wires MUST be
used. It is recommended to use 3m long welding gun for aluminium wires, equipped with appropriate
wear parts.
wC240
Ordering no. Notes
0455 907 001
0367 556 001 Ø 0.6−0.8mm Fe, Ss, cored wire.
0367 556 002 Ø 0.8−1.0mm Fe, Ss, cored wire.
0367 556 006 Ø 1.0−1.2mm cored wire.
0367 556 004 Ø 1.0−1.2mm Al wire.
0466 074 001
0455 894 001 Plastic, must be used together with item 0455 885 001,
for welding with Al wire.
0455 889 001 Steel, must be used together with item 0455 886 001.
0455 885 001 Must be used together with item 0455 894 001,
for welding with Al wire.
0455 886 001 Must be used together with item 0455 889 001.
− 18 −
Edition 060324