PRODUCT DESCRIPTION
Model
PRODUCT DESCRIPTION
This pump is for use in basins or lift stations and is suitable for pumping clear water and other non-explo-
sive, non-corrosive liquids. Do not use the pump in applications where sewage or any other debris (gravel,
sand, floating debris, etc.), abrasives, or corrosives are present.
These products have been carefully tested, inspected, and packaged to ensure safe delivery and operation.
Please examine your pump carefully to ensure that no damage occurred during shipment. If damage has
occurred, please contact the place of purchase. They will assist you in replacement or repair, if required.
This pump is designed for domestic household service only. Total pump run time should be two hours or less
per day.
The pump motor is equipped with an automatic resetting thermal protector, and may restart unexpectedly.
Thermal Protector tripping is an indication of motor overloading or overheating, which can be caused by
application issues such as an obstructed pump impeller, float stuck in the ON position, pump running dry,
pump air-locked, pump short cycling, excessively high or low voltage supply, or possibly a pump, motor,
bearings, or seal that have reached the end of their useful life.
Model
Model
HP Amps Voltage Float Type
RLSP33PED 1/3
4.0
Flow Rates
At Height: (Head)
RLSP33PED
Specifications
Discharge Size
1-1/4" FNPT
Intake Size
1/6" (4.2 mm) screened opening
Pump Housing
Polypropylene (including volute)
Impeller
Polybutylene
Motor
1/3 hp, PSC, 115 V, 60 Hz, 1725 RPM
Hardware
Zinc plated steel
Bearings
Ball bearings
Power Cord
18" (457 mm) AWG 3-Conductor Copper, Stranded, 8' Length (2.4 m)
Pump Shaft
PVC
4
8"- 10" (203 - 254 mm)/
115
Snap Action
Gallons/Liters per Hour
0 ft (0 m)
5 ft (1.5 m)
3300 / 12492
2800 / 10599
terephthalate
, top intake, non-clog
Minimum Basin
On/Off Levels
Diameter
13" (330 mm)
3"- 5" (76 - 127 mm)
10 ft (3 m)
2040 / 7722
Minimum
Maximum
Basin Depth
Basin Depth
18" (457 mm) 24" (610 mm)
15 ft (4.5 m)
Shut Off
600 / 2271
16 ft (4.9 m)