Alternative Charging Options; Troubleshooting The Monitor - Luda Elektronik IWT Horse & Trailer Cam Guide D'utilisation

8. alternative charging options

Charging the battery pack in your trailer while driving (a)
If you charge the battery pack inside the trailer while driving (normal installation),
the switch can be set in any position and the camera can either be connected or
disconnected.
Charging the battery pack at your home (b)
To charge the battery pack when not driving, use the 220V/240V power adapter. It
is always faster to charge the battery box with the camera disconnected and the
switch set to OFF. The battery pack will be fully charged in about 6 hours.
Charging options:
(a) In the trailer
-
+
- +
12/24 V
CHARGING

9. Troubleshooting the monitor

Follow the scheme below to systematically locate the problem with your installation.
No picture at all (black)
Possible error
• The monitor is not switched on.
• The monitor is not supplied with power.
Black screen or noise
(the channel indicator is on)
Continue to the next chapter.
(b) At home
NOT CHARGING
- 15 -
220 V
Action
• Press the On/Off (power) button to
turn the monitor on.
• Start the car to make sure the
lighter socket is supplying power.
• Make sure the lighter socket adap-
tor is pushed all the way into the
socket (the red LED is lit up on the
adaptor).
• Make sure the lighter socket
adaptor is connected to the DC 12V
socket of the monitor.
eN
De
Fr
12/24 V