Luda Elektronik IWT Horse & Trailer Cam Guide D'utilisation page 11

Power lead with terminals
Battery Pack
Use the battery pack to run the camera when vehicle lights are off and/or there is
no power inside your trailer. When the battery pack is fully charged it has a run time
of approx. 10 hours.
220V/240V power adapter
The 220V/240V power adapter is used to charge the battery pack via a 220V/240V
wall socket.
Power lead with terminals
The power lead with terminals is used to charge the battery pack via the trailer
electrics. See chapter 7 to learn how you connect this cable to an existing power
source.
Camera power supply cable
Supply the camera with power by connecting it to the power supply cable on the
battery pack. When not using the camera, set the switch to "OFF" or remove the
camera to avoid discharging the battery.
ON/OFF switch
Regardless if the switch is set to ON or OFF , the battery will be charged if it is
connected to a power source. When the battery pack is not in use do not forget to
set the switch to off to prevent discharging!
NOTICE!
Before you use the battery pack for the first time we recommend that you charge it
over night. When charging the battery pack over night, connect the battery pack to
a wall socket using the 220V/240V power adapter. Place the switch in "OFF" mode
when charging.
Suction cup
Battery pack.
Suction bracket for 3.6" LCD-monitor.
- 11 -
220V/240V power adapter
Camera power supply cable
ON/OFF switch
Locking lever
eN
De
Fr