Publicité
FUNCTION
MIN. ÷M AX.
3. 0
0 ÷ 2
-
3. 1
0 ÷ 99
3. 2
9. 8
-
-
9. 9
ERROR MESSAGES DISPLAYED
In case of an error during the test of the safety devices (therefore
device faulty), the display will indicate which device has failed the
test.
E1 = Torque regulator
E2 = Internal photocell
E3 = External photocell
E4 = Opening frame
PROGRAMMING OF KEY 1 OF THE TRANSMITTER
0 = Performs the same functions as the start button (terminals 8-6).
1 = Performs the same functions as the pedestrian gate button (terminals 9-6).
2 = Performs the same functions as the closing button (terminals 7-6).
DELETING TRANSM ITTER CODES
Selecting and entering this program , the first m em ory allocation containing a code is
displayed. With the increase button P1 the desired memory allocation may be selected and
the transmitter code contained in it deleted by pressing the button P2.
TRANSMITTER CODE STORAGE
Selecting and entering this program, the first free memory allocation is displayed. To store
the transmitter code, select the desired memory allocation with the button P1, press any key
of the transmitter and then press the button P2.
TEST PROGRAM
When selecting and confirming this program, all the data useful for functional testing of the
equipment will be stored, therefore all the safety devices will be active with program (1).
DEFAULT PROGRAM (BASIC)
When selecting and confirming this program, all the data present in the DEFAULT box will be
stored.
DESCRIPTION
DEFAULT
0
-
-
-
-
23
Publicité
