Problem
No indication
Indication
sensor error
Indication
ADC-overflow
Other malfunctions
Troubleshooting
Possible reason
Mains voltage is inter-
rupted
Short circuit in mains
cable
Interruption of the cable
to the device that sup-
plies the input signal
Error in the device that
supplies the input signal
Short circuit of the cable
to the device that deliv-
ers the input signal
-
Repair
Apply mains voltage.
Remove the short cir-
cuit.
Verify correct connec-
tion of the device that
supplies the input sig-
nal.
Check the device that
supplies the input signal
(see operating instruc-
tions of the manufac-
turer).
Remove the short cir-
cuit.
Contact the AFRISO
service hotline.
VarioFox® 24
EN
58