Publicité
Les langues disponibles
Les langues disponibles
Indication
off
working
rest
upper SP
This function is used to set the upper switching point. The relay switches
with the adjusted mode of action when the upper switching point adjusted
here is reached.
lower SP
This function is used to set the lower switching point. The relay switches
with the adjusted mode of action when the lower switching point adjusted
here is reached.
Save
This function is used to specify whether or not the switching of the relay is
to be saved.
Indication
No
Yes
Delay
This function is used to select a delay time between 0-255 seconds. The
relay switches after the delay time has elapsed.
Parameterisation
Function
Switches off limit value processing.
Relay operates according to the open-circuit principle
(energise-to-trip (ET); relay is de-energised when the
limit value is exceeded).
Relay operates according to the closed-circuit principle
(de-energise-to-trip (DT); relay is de-energised when
the limit value is exceeded).
Function
The switching process is not saved.
The switching process is saved.
A lowercase letter on the display indicates that the cor-
responding relay has switched in the meantime.
VarioFox® 24
EN
48
Publicité
