EN
3.7. TIPS AND ADVICE ON OPERATION
Observations
3.7.1. Adding/Deleting Control point
Orange LED blinks slowly when adding or deleting remote control.
Using a control point (A) that has been previously programmed to the driven product:
Using the Programming button on motor head:
3.7.2. Disabling/Activating "RTS" radio technology when control point is
definitively is programmed
Disabling the radio transmission saves battery life during shipment or for a long period of non-use
(eg storage). The following steps can only be performed in "User" mode.
Possible causes
Solutions
1
2
PROG.
PROG.
A
B
1
2
PROG.
B
PROG.
a
b