Operation With A Connected Hob; Making The Connection Between Cooker Hood And Hob - Pelgrim BEGA970 Serie Notice D'utilisation

OPERATION WITH A CONNECTED HOB

Making the connection between cooker hood and hob

The connection to an AutoAir hob is not active by default. First the
connection to the hob must be activated.
At the same time, a setting must also be made on the hob; see the hob
manual for this.
Check our website for the full range of hobs that can be connected to
your cooker hood.
Making a connection
1. Turn off the hood and the lighting.
2. Touch and hold the automatic mode key for three seconds.
The automatic mode key, the lighting key and the timer key will flash
simultaneously for a maximum of two minutes.
On your hob, activate the pairing mode in the user menu (see the
hob manual). The connection to the hob is established.
3. The connection is successful when the automatic mode key, the
lighting key and the timer key are illuminated continuously for four
seconds.
If the automatic mode key, the lighting key and the timer key are
no longer illuminated within two minutes, the connection was not
successful. Repeat the procedure. If necessary, clear the hood's
memory (see "Disconnecting").
Disconnecting
1. Turn off the hood and the lighting.
2. Touch and hold the automatic mode key for three seconds.
The automatic mode key, the lighting key and the timer key will blink
five times simultaneously.
The hob is no longer connected.
EN 9