Your Cooker Hood; Introduction; Extraction Systems - Pelgrim BEGA970 Serie Notice D'utilisation

YOUR COOKER HOOD

Introduction

Congratulations on choosing this Pelgrim cooker hood. This product is designed with simple
operation and optimum comfort in mind.
This extractor hood has AutoAir functionality. Via a hob with AutoAir function, the cooker hood
can then be controlled in 3 different ways: manually, semi-automatically, and fully automatically.
Choose the way that suits you best. Of course, you can always adjust the settings yourself.
These instructions for use explain how you can make best use of this appliance. These
instructions contain information about the operation of the appliance and background information
that may be of help to you during its use.
First read the safety instructions before using the appliance!
Read these instructions thoroughly before you first use the appliance, and keep the
instructions for future use.
You can find the most recent version of the instructions for use on our website.

Extraction systems

EN 4
The cooker hood can be connected in two ways:
1. As a cooker hood connected to an exhaust duct.
The cooking fumes are drawn into the cooking hood, filtered, and
exhausted outdoors. This is the best way!
2. As a recirculation cooker hood.
The cooking fumes are drawn into the cooking hood and the grease
droplets and odours are filtered out. The filtered air is not exhausted
outdoors, but is returned to the kitchen. You then need to fit an
odour/fine particle filter.
Note! The recirculation set including filter must be ordered
separately.