Battery Tool Use And Care; Service; Pole Saw Safety Warnings - Oregon PS250 Manuel D'instructions Original

• Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power tools
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control
• Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation

Battery Tool Use and Care

• Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack
• Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire
• When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water
If liquid contacts eyes, additionally seek
medical help Liquid ejected from the battery
may cause irritation or burns

Service

Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained
8
Important Safety Instructions

Pole Saw Safety Warnings

DANGER: Contact with a moving saw
chain will result in serious personal injury.
Keep hands and body away from moving saw
chain
DANGER: Contact with electrical wiring
during use may cause exposed metal parts
of the tool to become live, resulting in
serious personal injury. Always hold the pole
saw by the insulated gripping surfaces during
operation
WARNING: The use of an improperly
assembled pole saw may result in serious
personal injury. Only use this tool after it
has been properly assembled according to
"Unpacking and Assembly" in this manual
WARNING: Moments of inattention
during operation of the pole saw may result
in serious personal injury. Before starting the
pole saw, minimize all distractions, keep body
parts away from saw chain, and make sure the
chain is not in contact with any objects
Pole Saw Model PS250