Oregon PS250 Manuel D'instructions Original page 23

FOOTING
Stand with both feet on solid ground, with
weight evenly spread between them
Hold the pole saw as close as possible to the
body to maintain control (Fig 24)
FIG. 24
USING THE HARNESS
The harness helps to balance the pole saw and
distribute the weight of the pole saw across the
body, increasing comfort for extended use
This harness is equipped with a quick-release
that can be operated with one hand (Fig 25)
FIG. 25
Pole Saw Model PS250
Operating the Pole Saw
• Wear the harness over the head and the
shoulder opposite the trigger hand
• Adjust the strap length so that the clip is
about the same height as the hip (Fig 26)
FIG. 26
• Place the pole saw on a flat surface with the
harness loop facing up
• Attach the harness clip to the harness loop
(Fig 27)
FIG. 27
ADJUSTING THE SHAFT LENGTH
The pole saw features an extendable shaft that
allows greater reach into taller trees
For ease of use, extend the shaft only as much
as necessary to reach the work safely
• Turn off the pole saw and remove the battery
pack
23