p/Q closed-loop control amplifier
Type VT-VPRAP1-540-1X/.../SI
Component series 1X
Table of contents
Contents
Features
Features
Page
- Suitable for controlling direct operated high-response valves
for pressure control and flow control, with actual value
1
I/U interface
2
- Amplifier with additional electronics (daughter card)
2
- Analog amplifiers in Europe format for installation in 19" racks
3
- Valve position control with PID behavior
4, 5
- Controlled output stage
5
- Enable input
6
- Outputs short-circuit-proof
7
- Adjustment possibilities - Zero point valve
8
- Cable break detection for actual value cable and pres-
9
sure sensor
10
- Fast energization and fast deletion for short actuating times
11
- External controller shut-off
12
- Suitable for pressure sensors (1...6 V, 0...10 V, 4...20 mA),
see data sheet 30271
12
Notice:
The photo is an example configuration.
The delivered product differs from the figure.
RE 30082/06.12
1/12