Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY AND USE INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
For a correct use of "GURME" table chair we recommend you to take few minutes to read
this manual.
QUALITY GUARANTIES:
- Our table chair is made according to European safety standards EN 1272 : 1998.
- This product is guaranteed for a period as stated by the laws in force.
- All defects and/or deteriorations caused by wrong use, by the non respect of security
standards, assembling and use here mentioned or by modifications made on the product,
cannot be claimed.
- The natural consumption and damage caused by incorrect or wrong use are not disputed.
- Scratches, wear, dullness or the turning yellow of the parts due to rubbing, to the use of
detergents, sweat or weather phenomena are not a manufacturing defect.
- Wrong washes, wet and not well dried fabrics may create molds and cannot be
considered as manufacturing defects.
BEFORE USING THIS ARTICLE, READ CAREFULLY THE INSTRUCTIONS AND THE
SEQUENCE OF ASSEMBLY TO AVOID UNNECESSARY HAZARDS TO YOUR CHILD!
THROW AWAY AND REMOVE ALL POLY BAGS OF PACKING, THEY MIGHT BE RISKS
OF SUFFOCATION FOR YOUR BABY!
NEVER LEAVE YOUR CHILD UNATTENDED!
ASSEMBLING OF TABLE CHAIR:
1- Insert plastic eyelets on fastening clamps' tubes then fixing them on the support tube of
the seat (Fig. 1). For more easy assembly, insert clamp frame with dot label on the tube
with the same label; push right until spring comes out the slot.
2- To check proper assembly, rotate the two clamps inside (Fig. 2); if they rotate outward,
press the springs, remove them, swap them and assemble again (See point 1).
3- Let perfectly stick both Velcro sides and close buttons on both sides (Fig. 3).
Now your "GURME" table chair is ready for use. Make sure that all parts are correctly fixed
and assembled.
10
IMPORTANT!:
Publicité
