Initialization - Samsung HW-Q70T Manuel Complet

1. Go to the Samsung Electronics website
(www.samsung.com) → search for the model
name from the customer support menu
option.
• For more information about update, refer
to Upgrade Guide.
2. Download the upgrade file (USB type).
3. Unzip the file to create a folder with the file
name.
4. Store the created folder in a USB and then
connect it to the Soundbar.
5. Turn on the Soundbar. Then the product is
updated within 3 minutes with displaying the
message, "UPDATE".
• During update, do not turn it off or
remove the USB.
• If "UPDATE" does not appear on the
display window, remove the power cord
from the Soundbar and then reconnect it.
• When the latest version is installed, no
update is performed.
• Depending on the USB type, update may
not be supported.

Initialization

Top of the Soundbar
With the Soundbar on, press the
buttons on the body at the same time for at least
5 seconds. "INIT" appears on the display and then
the Soundbar is initialized.
CAUTION
• All the settings of the Soundbar are
initialized. Be sure to perform this only when
initialization is required.
INIT
(Volume)
ENG - 38