Connecting An External Device; Method 1. Connecting Using An Hdmi Cable (Capable Of Dolby Atmos Decoding And Playback) - Samsung HW-Q70T Manuel Complet

07 CONNECTING AN EXTERNAL DEVICE

Method 1. Connecting using an HDMI Cable (Capable of Dolby
Atmos decoding and playback)
Pre-connection Checklist
• Dolby Atmos® and DTS:X are supported in HDMI mode only.
• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.
• Make sure that the content supports Dolby Atmos®.
External Device
1. Use an HDMI cable to connect the HDMI OUT port on the external device and the HDMI port on the
bottom of the Soundbar.
2. Use an HDMI cable to connect the HDMI IN port of the TV and the HDMI TO TV (eARC/ARC) port on
the bottom of the Soundbar.
3. Turn on the Soundbar, TV, and the external device.
4. Press the (Source) button on the top panel or on the remote control, and then select "HDMI".
5. The Soundbar display indicates that "HDMI" mode is currently selected and the Soundbar will start
playing sounds.
Top of the Soundbar
HDMI OUT
HDMI Cable
HDMI IN
HDMI Cable
(ARC)
ENG - 26
HDMI
HDMI TO TV
(eARC/ARC)
Bottom of the Soundbar
HDMI