Start-Up; Charging The Water In The Boiler - SM TOP 85 Serie Traduction De La Version Originale Du Mode D'emploi

ONLy FOR
MODELS
TOP 85 SPRINT
REMAINING
MODELS
NOTES:
* The power absorbed
by the electric heating
elements can be
reduced to 2/3 by
eliminating one of the
black wires.

4. Start-up

• The coffee machine must be started by qualified technical personnel approved by La
San Marco.
• Once the electric and hydraulic connections are completed, the user is urged to start
the espresso coffee machine with the following procedure in order to avoid damaging
the appliance.

4.1 Charging the water in the boiler

1) Check that the machine main switch 1 (figure 1) is in position 0 (zero).
2) Remove the tray and the cup support grill and make sure that:
a) The boiler drain valve a is closed (figure 8).
b) The taps of the automatic level valve b-c must be open (figure 8).
c) The taps for the volumetric counters e-d must be open (figure 10).
230V MONO-PHASE
BLUE
BLACK
GREy
BROWN
yE/GR
400V-3 TRI-PHASE
BLUE
BLACK
GREy
BROWN
yE/GR
230V-3 TRI-PHASE
BLUE
BLACK
GREy
BROWN
yE/GR
230V MONO-PHASE* 400V-3N TRI-PHASE
BLUE BLUE
BLACK BLACK
GREy GREy
BROWN BROWN
yE/GR yE/GR
230V-3 TRI-PHASE
BLUE
BLACK
GREy
BROWN
yE/GR
2 HEATING ELEMENTS
BLACK
GREy
BROWN
BLUE
yE/GR
3 HEATING ELEMENTS
BLUE
BLACK
BROWN
GREy
yE/GR
3 HEATING ELEMENTS
BLUE
BLACK
BROWN
GREy
yE/GR
3 HEATING ELEMENTS
BLUE
BLACK
GRIGIO
BROWN
yE/GR
3 HEATING ELEMENTS
BLUE
BLACK
BROWN
GREy
yE/GR
45