Empire Heating Systems ULTRASAVER 90 PLUS PVS18N-3 Guide D'utilisation Et Instructions D'installation page 24

Gas Supply Line to Wall furnace
1. Pull the factory installed flexible gas line through the hole in
the back panel. See Figure 36.
2. Connect the gas supply line to flexible gas hose. Ensure that
flexible gas hose is not kinked after fitting gas supply line. Any
excess flexible line can be pushed back into the wall furnace.
See Figure 36.
Page 24
WALL FURNACE INSTALLATION
Figure 36
Figure 37
GAS SUPPLY
37873-0-0217