Connecting The Water; Switching On The Appliance; Switching Off And Disconnecting The Appliance; Door Alarm - Siemens S18ID Série Notice D'utilisation Et De Maintenance

Connecting the
water
CAUTION
The manufacturer is not liable for
damage to property due to an
incorrect installation or water
connection.
A cold water connection is required
for operation of the automatic ice
maker. The water pressure must be
between 25 and 120 p.s.i.
(1.72–8.25 bar).
The installation must comply with
local plumbing regulations and local
and state laws.
A separate shut-off valve must be
installed for the appliance water
connection.
The shut-off valve for the water
connection must not be behind the
appliance. It is recommended to
place the shut-off valve directly next
to the appliance (base unit) or in
another easily accessible location.
Switching on
the appliance
Press the power button.
When the appliance has been
switched on, the appliance begins to
cool down. When the doors are
open, the interior lights come on.
The preset temperatures (factory
settings) are reached after approx.
2–8 hours. Do not put any food in
the appliance beforehand.
Do not use the first ice cubes
from the ice maker! Discard the
ice production of the first
24 hours after switching on the
icemaker.
To change the preset temperatures
see "Setting the temperature".
Switching off
and
disconnecting
the appliance
Switching off the
appliance
Press the power button.
If switching off the appliance for
a period longer than 2 weeks,
remove the water filter. Before

switching on the appliance

again, install a new filter (see
"Exchanging the filter").
Disconnecting the
appliance
If you do not use the appliance for
a prolonged period:
Shut off the water supply line
several hours before switching
off the appliance.
Remove and discard the water
filter. Secure the filter cap!
Take all food out of the freezer.
Pull out the mains plug or switch
off the fuse.
Empty the ice cube container.
Clean the appliance interior
(see "Cleaning the appliance").
To prevent odors, leave the
doors open.

Door alarm

If one of the appliance doors is left
open, an alarm signal sounds after
one minute.
The alarm is switched off with the
alarm off button and by closing the
door. If the door has stili not been
closed properly, the alarm sounds
again after one minute.
Variable interior
design
You can re-arrange the shelves
inside the appliance and the
containers in the door as required.
Shelves
The height of the shelves can be
adjusted.
Lift the shelf at the front and
move it up or down in the
guides.
Lower the shelf to the required
position and snap it into the
preset openings in the guide.
To remove the shelves:
Lift the shelf at the front, move it
as far as the openings on the
guide rail and remove.
7