Changing The Bulb; Halogen Bulbs Above; Halogen Bulb On The Ice And Water Dispenser; Service - Siemens S18ID Série Notice D'utilisation Et De Maintenance

Changing the
bulb
m
WARNING
To avoid electrical shock which
can cause death or severe
personal injury, disconnect power
to appliance before making
repairs.
After making repairs, reconnect
power.
Switch off the appliance with
the power button! Pull out the
mains plug or switch off the
fuse.
CAUTION
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen
bulb, always hold with a soft cloth.

Halogen bulbs above

Halogen bulb type:
20 W/12 V/socket G4
Release the cover and remove
from the clip.
Pull out the defective halogen
bulb.
24
m
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.
Attach the cover and connect to
the clip.
Halogen bulb on the
ice and water
dispenser
Halogen bulb type:
5 W/12 V/socket G4
Pull out the defective halogen
bulb.
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.

Service

If you need service, first see the
"Troubleshooting" section of this
book. After checking "Trouble-
shooting", additional help can be
found by calling the Siemens
Customer Interaction Center,
1–800–944–2904 (toll-free),
from anywhere in the U.S.A.
In Canada, contact your designated
Siemens Canada service company
or call 1–800–944–2904.
Write down the following information
about your freezer to better help you
obtain assistance or service if you
ever need it.
Dealer name:
Address:
Phone number:
Purchase date:
Model number:
FD number:
Serial number:
Type:
You will need to know your complete
model number and serial number.
You can find this information on the
model and serial number label
located on the inside wall of the
freezer compartment.