Lovato MACUK S-SR PRO Instructions Relatives À L'installation, L'utilisation Et La Maintenance page 25

INSTALLAZIONE SU STAFFA
1
JIG INSTALLATION
3
3. Fix no. 2 plugs on the wall, respecting the
distance as shown in rif. 2. Fix the screws
in the plugs.
IMPORTANT!
!
PLACE THE BRACKET IN THE
CORRECT PLACE
WALL BRACKET INSTALLATION
4
4. Fix No. 2 plugs on the wall respecting the
distance as shown in rif.2. Fix the screws
in the plugs.
Assembling instrunctions and maintenance
ATTENTION!
!
HANDLE IT WITH CARE!
1. Pull out the module from the package
and remove the cover.
2. Use the paper template you will find
into the cardboard box, hang it on the
wall and trace the points of the holes
where you fix the module (Pic.2)
Fori modulo
Fori dima
SCREW ANCHORS NOT
SUPPLIED
2
4a
Install the module on the the plugs through the slots on
the back of the module. Slide it down and fix the screws
in the plugs (4a). Tighten the nuts between the module
and the connection jig.
25