Lovato MACUK S-SR PRO Instructions Relatives À L'installation, L'utilisation Et La Maintenance page 23

WALL-HUNG VERSION
1
JIG INSTALLATION
3
3.
Fix no. 2 plugs on the wall, respecting the
distance as shown in rif. 2. Fix the screws
in the plugs.
IMPORTANT!
!
PLACE THE BRACKET IN THE
CORRECT PLACE
4
Assembling instrunctions and maintenance
ATTENTION!
!
HANDLE IT WITH CARE!
1.
Pull out the module from the package
and remove the cover.
2. Use the paper template you will find
into the cardboard box, hang it on the
wall and trace the points of the holes
where you fix the module (Pic.2)
4. Install the module on the the plugs through the slots on the back of
the module (pic.4). Subsequently lay down the module till the complete
connection with the jig and fix the screws in the plugs.
Insert the washers and tighten the
nuts between the module and the
connection jig.
2
Holes of module
Holes of jig
SCREW ANCHORS NOT
SUPPLIED
23