Eliminating Malfunctions Of The Device; Manufacturer Declarations; 10.1 Warranty - Artyst NR.1 Manuel D'utilisation

If a longer signal tone sounds during on-
going operation of the handpiece and the
message CONNECT HANDPIECE or SYS-
TEM OVERLOAD appears on the display:
Ensure that the handpiece cable for
E
the handpiece is connected correctly.
If three consecutive longer signal tones
sound and the message SYSTEM ERROR
appears on the display:
Ensure that you only use the power
E
supply included in the scope of deliv-
ery.
Disconnect the device from the voltage
E
supply by pulling the power supply
plug out of the socket.
Re-connect the voltage supply.
E
If this fault occurs frequently, perform
E
all steps in chapter 9.2 on page 40.
9.2 Eliminating malfunctions of the
device
First, disconnect the device from the
E
power supply, from the optional foot
switch and from the handpiece.
Check all connections and re-connect
E
the components.
40 EN
Check the functions of the device once
E
again.
If functional problems persist, and if
E
you have any questions or complaints,
please contact the specialist retailer
responsible.
10

Manufacturer declarations

10.1 Warranty

With this device, you have purchased a
high-quality branded product. The relia-
bility of this device is assured through
application of the latest inspection tech-
nologies and certification. MT.DERM
GmbH is certified in acc. with:
DIN EN ISO 13485:2016 (quality man-
O
agement system for medical products)
For this product, the statutory warranty
period applies to radio interference prob-
lems resulting from defects in material
and workmanship.
We guarantee sterility for the needle car-
tridges with delivery of sealed and un-
damaged packaging. For complaints re-
lating to needle cartridges, please advise
us of the lot number printed on the label.
The warranty does not apply to the fol-
lowing damage:
Accident, misuse, abuse or alteration
O
Servicing by unauthorized persons
O
Connection to inappropriate power
O
sources
Use with unauthorized accessories
O
Use for anything other than indicated
O
in this instruction for use
Damage arising from the ingress of
O
fluids or dirt into the inside of the de-
vice or power supply.
artyst NO.1