SMA SUNNY BOY 3.8-US Instructions D'installation page 15

SMA Solar Technology America LLC
Position
E
F
G
Symbols on the Product and on the Type Label
Symbol
Installation Manual
Designation
Type label
The type label uniquely identifies the inverter. The type label must remain
permanently attached to the product. You will find the following informa-
tion on the type label:
• Inverter device type (Model)
• Serial number of the Power Unit (S/N)
• Date of manufacture
• Device-specific characteristics
Additional type label
The additional type label must remain permanently attached to the prod-
uct. You will find the following information on the additional type label:
• Device type (Model)
• Inverter serial number (S/N)
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• WLAN password (WPA2-PSK) for the direct connection to the user
interface of the inverter via WLAN
LEDs
The LEDs indicate the operating state of the inverter.
Explanation
Inverter
Together with the green LED, this symbol indicates the operating state of
the inverter.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Data transmission
Together with the blue LED, this symbol indicates the status of the network
connection.
Equipment Grounding Terminal
This symbol indicates the position for the connection of an equipment
grounding conductor.
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during opera-
tion. Prior to performing any work on the product, allow the product to
cool down sufficiently.
4 Product Overview
SBSxx-US-10-IA-xx-11 15