Trouble Shooting
FAULT
Irregular cut
Noisy machine
Excessive vibration
8
POSSIBLE CAUSE
Worn or broken blades
Loose parts
Insufficient oil in gearbox.
Incorrect PTO R.P.M. rate.
Loose parts.
Incorrect PTO rate.
Broken or missing blade or blade bent
following impact
REMEDY
Sharpen or replace blades
Check all bolts are fully tightened.
Check oil level and top up as necessary.
Check PTO R.P.M. and adjust as necessary.
Check all bolts are fully tightened.
Check PTO R.P.M. and adjust as necessary.
Check blades and replace if necessary.