i-tec Travel Dock 4K HDMI Guide D'instructions Et Mode D'emploi page 2

ENGLISH
INTRODUCTION
Thank you for purchasing the i-tec docking station, our product allows you to connect your favourite
devices via a single USB-C connector to a laptop, tablet or smartphone with a USB-C port. The docking
station provides 1x HDMI 4K port, 1x VGA Full HD, 2x USB-A 3.0 port, 1x Ethernet GLAN RJ-45 port, 1x
USB-C Power Delivery / Data port.
Please read the entire manual carefully before using the docking station. The manual is also
available on our website www.i-tec-europe.eu in the tab „Download". In case of any problems,
contact our technical support: support@itecproduct.com.
TERMINOLOGY
Interface / port / connector / input / slot – a place where two devices are physically connected.
Chipset – a semiconductor device in a laptop, tablet or PC controlling the function of a port.
USB-C – is a new symmetrical connector which allows faster charging, energizing, double-function (a host
and a guest), support for alternative modes (DisplayPort, MHL and Thunderbolt).
Alternative modes (Alt modes) – special modes for USB-C connector, which can be supported. Currently the
most popular ones include DisplayPort / DockPort, MHL and Thunderbolt. Devices with this feature,
connector and cables allow transmission of images and at the same time preserve other functions of the
connector (for data transfers and charging).
DisplayPort/DockPort Alt mode – this mode allows transmission of images through USB-C connector and a
cable.
USB-C Power Delivery (USB-C PD) – optional property of the USB-C connector. A connector with this support
can charge and be charged at the same time and it supports loads from 10W to 100W (depending on
profiles 1-5).
USB 3.1 / 3.0 / 2.0 – a standard for USB interface / port for connection of various USB devices. Various USB
devices can be connected to the docking station or adapter using the USB interface type A. USB type B is
used for connecting the docking station or adapter to a laptop, tablet or PC.
HDMI – a standard for digital graphical interface / port for connection of monitors and other graphical
display devices.
Audio – designation for audio input (microphone) or output (earphones / loudspeakers).
VGA – a standard for analog graphical interface / port for connection of monitors and other graphical
display devices.
PACKAGE CONTENTS
• i-tec USB-C Docking Station with cable (10 cm)
• Quick Start
SPECIFICATION
Graphic interface: 1x HDMI (max. resolution 4K 3840x2160@30Hz, for connecting a HDMI monitor),
•
1x VGA (max. resolution Full HD 1980x1080@60Hz, for connecting a VGA monitor). It is not possible
to use both graphic outputs simultaneously, a single monitor only can be connected to the docking
station (HDMI or VGA).
Mode: Extend, Mirror and Primary Display
•
Supported colors 16 / 32 bit
•
2x USB-A 3.0 ports for connecting USB 3.1/3.0/2.0 devices for high-speed data transmission up to 5
•
Gbps
1x USB-C Power Delivery / Data Port – Power Delivery with the profile 4 (max. 60W) for charging
•
laptops, tablets or smartphones with support for Power Delivery. To this port you can connect an
original or a universal AC power adapter with USB-C connector, it ensures the constant charging of
your laptop, tablet or smartphone during your work. This port also enables data tranfer, therefor
can be used to connect modern data devices with USB-C connector (e.g. Ethernet adapter, USB
Flash Drive...) However the port does not enable video tranfer.
• 1x Ethernet GLAN RJ-45 port for fast network and Internet access with Gigabit Ethernet connection,
it supports speeds of 10 / 100 / 1000 Mbps