Publicité
Les langues disponibles
Les langues disponibles
E-MOTIKA
58
SAFETY CONTROLS
Before first use, we recommend that qualified personnel carries out the safety controls
mentioned below:
BRAKE
1.
-
Make sure that front and rear brakes correctly work;
-
Make sure that brake shoes are not damaged or worn out and that are correctly
placed on wheels;
-
Make sure that brake cables are lubricated, correctly connected and not worn out;
-
Make sure that brake levers are lubricated and correctly placed on the handlebar.
2.
WHEELS AND TYRES
-
Make sure that tyres are inflated within limits indicated on tyres side;
-
Make sure that tyres have enough rim and do not present protuberances or excessive
wear;
-
Make sure that wheels are intact and not defective;
-
Make sure that spokes are tense and not damaged;
-
Check that fixing nuts are correctly tightened.
3.
HANDLEBAR
-
Make sure that handlebar and stem are correctly installed, in order to ensure a safe
riding;
-
Make sure that handlebar is aligned with fork and riding direction;
-
Check that handlebar stem is correctly installed;
-
Make sure handlebar bolt is firmly tightened.
CHAIN
4.
Make sure that chain is lubricated, clean and turns properly;
-
If chain entered in contact with dust and water, it needs a greater maintenance.
-
5.
HUB
- Make sure that hubs turn without obstacles, squeaks or metallic noises.
6.
CRANK AND PEDAL
Make sure that pedals are safely fixed to cranks;
-
Make sure that cranks are safely fixed to the axle and are not damaged.
-
Check the fastening status of pedals and cranks.
-
7.
DERAILLEUR
Check that rear and front mechanisms are correctly installed and properly work;
-
Make sure that shift and brake levers are connected to gearbox and brake;
-
Make sure that derailleurs, brake and shift levers and cables are properly lubricated.
-
8.
FRAME AND FORK
Check that frame and fork are not damaged;
-
If they present problems or defects, they need to be substituted.
-
9.
ACCESSORIES
Make sure that lights and reflectors are properly installed and not darkened. (Note:
-
the included accessory can vary according to the ebike model).
Make sure that all bike components are properly and safely fixed, and they perfectly
-
work;
Make sure that driver wears a safety helmet.
-
10.
MOTOR
- Make sure that motor components are properly installed, and they perfectly work.
Publicité
