Trevi TT 1072 DAB Mode D'emploi Et Connexion page 15

ENGLISH
BLUETOOTH OPERATION
1. Switch on the appliance and press the FUNCTION button (11) until the Bluetooth indication appears on the display.
2. Activate the Bluetooth functionality on the external device to be paired and make it visible.
3. Start searching for devices. At the end search for the "TT 1072 DAB" device.
4. Enter the password "0000" if necessary.
5. After successful pairing, the word CONNECTED appears on the display.
6. Start playback on your device. The management of the audio tracks can be performed directly from the controls on the unit or
from the remote control.
USB / SD INPUT OPERATION
REPRODUCTION
1. Connect a USB memory device to the USB input (5) or insert an SD memory card to the SD input (7).
2. Switch on the device and press the FUNCTION button (11) several times until the USB indication appears on the display, which
indicates that the data in the USB device or CARD is loaded for the SD reader. In case of absence of the USB or SD device, the
indication NO USB / NO CARD will appear on the display.
Note: the device may not support some SD / USB devices, this is due to the incompatibility of some processors.
3. For the rest of the functions, refer to the paragraph "MP3-CD PLAYER OPERATION".
RECORDING (ENCODING) MP3 FROM TURNTABLES / AUX IN / CD / RADIO / CASSETTE
This unit allows the recording of audio tracks from turntables, Aux In input, CD player, radio, cassette on USB or SD device in MP3
format.
ENCODING FROM CD
1. Insert an audio CD into the CD player. When the disc starts playing, press the STOP button (25).
2. Insert a USB memory into the input (5) or an SD card into the input (7).
If you want to record only one audio track:
- Select with the keys (27) or (26) the song you want to convert.
- Press the REC button (23) once, the word REC_ONE appears on the display, press the REC button (23) again and the playback
/ recording of the selected song will automatically begin. If there is a USB memory and an SD card at the same time, select
(27) or (26) where to save the song to be recorded.
- At the end of the song the recording will stop automatically (END RECORDING appears on the display), the coded song is saved
in the Usb / SD memory in a folder called RECORD / CDIN.
If you want to record the entire audio disc:
- Press the REC (23) key once, when the word REC_ONE appears on the display, press (27) or (26), the word REC_ALL appears
on the display, press the REC key again. If there is a USB memory and an SD card at the same time, select via (27) or (26)
where to save the song to be recorded. Automatically the playback / recording of the entire disc will begin.
- At the end the recording will stop automatically, the encoded tracks are saved in the Usb memory in a folder called RECORD /
CDIN.
If you want to record using the PROGRAM function:
- Program the tracks as described in the paragraph CD player operation - Program function.
- Press the REC (23) key once, when the word REC_ONE appears on the display, press (27) or (26), the word REC_ALL appears
on the display, press the REC key again. If there is a USB memory and an SD card at the same time, select via (27) or (26)
where to save the song to be recorded. The playback / recording of the programming will automatically begin.
- At the end the recording will stop automatically, the encoded tracks are saved in the Usb memory in a folder called RECORD /
CDIN.
Note: the tracks are recorded / copied in 1: 1 mode, that is, the recording / copying phase requires the same playing time.
To copy an MP3 CD onto a USB memory, follow the instructions as for recording from an audio CD; the selected tracks will be
copied without being played, the track being copied and the percentage of the copy made will appear on the display. In case of
MP3 CDs with multiple folders it is possible to choose which folder to copy (FOLDER). The copied tracks are saved in the USB
memory in a folder called RECORD / COPY.
TT 1072 DAB
15