Trevi TT 1072 DAB Mode D'emploi Et Connexion page 14

ENGLISH
DAB RADIO OPERATION
1. Switch on the appliance and press the FUNCTION button (11) until the indication DAB appears on the display.
2. Press the keys (27) or (26) on the unit, or the keys (12) on the remote control to select one of the available radios and confirm
with the SELECT key (25).
3. To store a radio station:
- Move to the frequency to be stored, long press the MODE key (14).
- With the buttons (27) or (26) select the memory number where you want to save the radio station.
- Press the SELECT button (25) to confirm.
- The device is capable of storing up to 30 stations.
5. To select a stored radio station, press the MODE key (14) and select the desired memory location using the keys (27) or (26),
confirm with SELECT (25).
6. To re-scan the available DAB radio stations, long press the TUNER SCAN button (24).
7. Press the INFO button (12) to view various information transmitted by radio stations on the display.
8. Long press the MENU key (12) to access the DAB radio settings menu, move within the menus using the keys (27) or (26) and
confirm with the SELECT key (25). The following settings are available:
- FULL SCAN: to carry out a new scan of the available DAB radio stations.
- MANUAL TUNE: to perform a manual search of the DAB stations present.
- DRC: allows you to enable / disable the DRC function to improve the sound when listening in noisy environments. You can set
the DRC level to high (high), low (low) or Off (off).
- PRUNE: allows you to delete all the radios found but not available from the list of stored stations (poor signal).
CD-MP3 PLAYER OPERATION
REPRODUCTION
1. Switch on the appliance and press the FUNCTION button (11) several times until the indication CD appears on the display
2. Open the CD compartment by pressing the button (30) on the unit, or the OP/CL button (5) on the remote control and insert
the disc into the CD compartment (22), with the written side facing up. Close the door by pressing the button (30) on the unit
again, or the OP ./CL.(5) button on the remote control.
3. After a few seconds the display will show the number of tracks on the disc. Playback will begin automatically. The display will
show the track number being played and the elapsed time. If you play a disc with MP3 tracks, this indication will appear on the
display.
4. Press the button (24) to activate the pause. Press the button again to deactivate the pause.
5. Press the button (25) on the device to stop playback permanently.
JUMP TRACK AND QUICK SEARCH
1. Press the keys (27) or (26) once to go to the previous or next track.
2. Press and hold the button (27) or (26) while listening to quickly search for a particular passage of music. Release the button
to return to normal playback.
REPEAT
Press the MEM / MODE key (14) to activate the various repeat functions: REP ONE (single track), ALBUM (entire folder selected,
only with MP3 discs and folders present), REP ALL (all tracks), RANDOM (playback random), CDDA / MP3 (normal playback).
PROGRAM FUNCTION
Playback according to a programming set by the user.
1. If the CD is playing, stop it by pressing the button (25).
2. Press the MEM / MODE key (14), the display will show P01 indicating the position of the track in the sequence to be played.
3. Select the track number you want to play using the buttons (27) or (26).
4. Confirm by pressing the MEM / MODE key (14), the message P02 will appear on the display.
5. Continue selecting the number of other desired tracks following steps 3 and 4 up to a maximum of 20 tracks with audio CD or
99 tracks with MP3 disc. The display will show P01, P02, P03 etc. in sequence.
6. Press the button (24) to start programmed playback. PROG appears on the display.
7. Press the button (25) once to temporarily stop programming. Press the key (24) on the appliance to restart programming.
8. Press the key (25) twice to deactivate and completely cancel the programming.
AUX IN INPUT
1. Switch on the appliance and press the FUNCTION button (11) several times until ENTER AUX appears on the display.
2. Connect any unit equipped with audio output by means of a special cable to the AUX IN input (8).
3. Control the external unit from its commands.
4. Adjust the volume using the control on the unit (13).
14
TT 1072 DAB