Hdd Utility; Checking Hdd Information (Hdd Info.); Formatting The Hdd (Hdd Format) - Yamaha CDR-HD1500 Mode D'emploi

Checking HDD information
(HDD Info.)
You can check the HDD utility (capacity, usage, and available
space) of this unit.
1.
Press MENU while this unit is in the stop mode.
The display changes for the menu item selection.
2.
Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select "HDD Utility".
H D D U t i l i t y
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display "HDD Info.".
H D D I n f o .
4.
Press the MULTI JOG knob (ENTER on the remote
control) again to display the capacity of the HDD.
Rotating the MULTI JOG knob (pressing +/–, H or G on the
remote control) changes the display as follows. The disc
capacity is indicated by time (hour and minute).
Capacity (total time)
T o t a l 2 5 0 h 4 m
Usage (total used time)
U s e d
Available space (recordable time)
A v a i l 2 4 8 h 5 6 m
Memo
The times displayed are rough estimates.
5.
Press a or MENU to exit.
The unit returns to the stop mode.
72

HDD UTILITY

L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
1 h 7 m
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R

Formatting the HDD (HDD Format)

You can format the HDD in this unit.
Notes
• After the HDD has been formatted, all data about the recorded
tracks and settings will be erased from the HDD.
• After all data on the HDD have been initialized, the undo function
cannot be applied to any editing operations before formatting.
1.
Carry out steps 1 to 3 in "Checking HDD information
(HDD Info.)" (at left).
The display changes for the HDD utility item selection.
2.
Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select "HDD Format".
H D D F o r m a t
3.
Press the MULTI JOG knob (ENTER on the remote
control) to display "Initialize ?".
I n i t i a l i z e ?
4.
Press the w/d to display "Format Really ?".
F o r m a t R e a l l y
To format the HDD, press INPUT. If not, press a.
5.
Press INPUT to display "Format OK" and restart the
unit.
Note
You cannot apply "HDD Format" for a new HDD. To format a
new HDD after installation, refer to "HDD Installation
Manual".
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R
L
dB –30 –10 –6 –2 0
R