Starting The Soldering Process - Weller WQB 3000 Mode D'emploi

Setting the parameters - Step 1 - Step 3
Temperature of the bottom heater
Nozzle temperature
Airflow (5 – 50l/min)
Time
Supplementary settings
Cooling time
Size of bottom heater
Step 1

3.2 Starting the soldering process

The status will appear on the display of the programming unit (17).
S T A T U S
- - - - - - - - - - - - - - - - - - - -
→ P R E H E A T T T E M P .
The arrow keys < > can be used to jump between Preheat Temp., Nozzle Temp. and the optional thermal
element Sensor 1 and Sensor 2. The current temperatures will be shown on the display.
25
50°C - 400°C
50°C - 400°C
10% - 100%
0sec. - 999sec.
0sec. - 999sec.
Small / Large
Step 2 Step 3 Cooling
P 0 1
1 0 0 ° C
Cooper Tools GmbH, Carl-Benz-Str. 2, 74354 Besigheim, P.O. Box 1351
Bottom heater
Soldering nozzle
Circuit board (external sensor)
Status
Basic condition of the
programming unit
Germany, Tel: (07143) 580-0, Fax: (07143) 580108