Reloop READY Mode D'emploi page 5

Always connect the supplied USB cable to the USB-B PC/Power Port -30- and connect it to a USB power supply. Please only use the original
power cable of your tablet / smartphone or use an appropriate power supply unit (5V, 2A) to ensure a sufficient power supply. Alternatively,
you can purchase the following USB power supply as a spare part: Item No.: 243382.
OPERATION SERATO DJ LITE:
1. GAIN
Use the Gain Control -1- to adjust the channel volume.
2. EQUALIZER
With the 2-band Equalizer -2- you can adjust the treble and bass for channels 1 & 2.
3. BROWSE ENCODER
Use the Browse Encoder -3- to navigate through your music libraries. Press the Browse Encoder -3- to confirm your selection.
SHIFT: To go back one menu item, press SHIFT -7- + Browse Encoder -3-.
4. TRACK LOAD
Press the Track Load button -4- to load a track to the desired deck.
5. FILTER
Channel 1 & 2 have an individual Filter -5-. In the 12 o'clock position the filter is switched off. Turning Filter -5- clockwise creates a high-pass effect,
turning it counter-clockwise creates a low-pass effect.
6. HEADPHONES/CUE BUTTONS
With the Headphones/Cue Buttons -6- you can monitor the respective audio signal of channels 1 & 2.
7. SHIFT
Pressing SHIFT -7- + a selected button activates the respective functions of the 2nd level, according to the labelling of the device.
NOTE!
Some functions of the 2nd level can only be executed with the
Serato DJ Pro version, these can be recognized by the additional PRO labelling.
8. PITCH FADER
The Pitch Fader -8- determines the tempo of the track.
9. LINEFADER
With the Linefader -9- you can adjust the output volume for channels 1 & 2.
10. CROSSFADER
The Crossfader -10- switches between the left and right channel.
11. JOG WHEEL
The Jog Wheel -11- is active by default in pitch bend mode. The surface is touch-sensitive and reacts to body tension. Turning the outer rim -11- can
be used to perform a pitch bend.
SHIFT: By pressing SHIFT -7- + turning the Jog Wheel -11- at the same time, you can perform the SKIP/quick search function (fast scroll through track).
12. PERFORMANCE PADS
The Performance Pads -12- are colour-coded drum pads that control the selected performance mode. The different performance modes can be
activated by holding the MODE Button -19- and pressing the subsequently selected Performance Pad mode -12-.
THE FOLLOWING PERFORMANCE MODES ARE AVAILABLE:
Hot Cue Mode = Triggers the 4 available cue points per deck and the pad colours light up in the corresponding colours.
- SHIFT: By pressing SHIFT -7- and the respective Cue Pad, the selected Cue Point will be deleted.
- PRO: In Serato DJ Pro you are able to set up 8 hot cues per deck.
Auto Loop Mode = Each of the 4 Performance Pads in the first row has a different loop length. Pressing it will activate it immediately according to the
length, pressing it again will deactivate the Auto Loop. The 4 pre-assigned loop sizes on the Drum Pads can be changed via the Parameter Buttons -15-.
The Performance Pads in the second row (5-8) are assigned as follows:
- Pad 5: Move the selected loop backwards in the track
- Pad 6: Adjust the reduction parameter to move the selected loop within the track
- Pad 7: Adjust the enlargement parameter to move the selected loop within the track
- Pad 8: Move the selected loop forward in the track
PRO: In Serato DJ Pro you can also half or double the selected loop by using the Parameter Buttons -15-.
Manual Loop Mode = The 4 Performance Pads in the first row are assigned to the following functions:
- Pad 1: Set Loop In
- Pad 2: Set Loop Out
- Pad 3: Loop On/Off
- Pad 4: Jump to activated Loop In, pressing Pad 4 again deactivates loop
PRO: In Serato DJ Pro the pads in the second row are assigned as follows:
- Pad 5: Upward Scrolling through loops
- Pad 6: Downwards Scrolling through loops
- Pad 6: Save activated loop to empty loop slot
- Pad 8: Not assigned
Sampler Mode = Triggers the respective sample in the sample bank using the 4 drum pads -12-.
SHIFT: Pressing SHIFT -7 + the active sample drum pad will stop playback of the sample.
PRO: In Serato DJ Pro you are able to load 8 samples to the Sample Bank.
NOTE!
In Serato DJ Lite, you only have access to the 4 Performance Modes listed above. With the exception of Auto Loop Mode, the Performance
Pads in the second row (5-8) are assigned with the same function in each DJ Lite Performance Mode, as follows:
- Pad 5: Reverse On/Off
- Pad 6: Hold to rewind the track
- Pad 7: Hold to forward the track
- Pad 8: Playback from temporarily set Cue point, if the Cue is not set, the start Cue is automatically set to the beginning of the track and
will start playing immediately (CUP – Cue and Play)
If you are a Serato DJ Pro user, you will have access to 4 additional DJ Pro Performance Modes in the second row of the Performance Pad section -12-.
PRO P'n'T: Pitch Play Mode = In combination with the Pitch'n'Time Expansion Pack you can play your cues in different keys via the Performance
Pads -12-. There are 3 scales available. To switch between the scales, press the left or right Parameter Button -15- of the respective channel. The
5