CAUTION!
For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation, maintenance and
service of this device must be appropriately qualified and follow this operation manual in detail. This product complies with the requirements of the applicable European
and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer.
INDEX
MAINTENANCE ...........................................................3
INSTALLATION ............................................................3
FEATURES ...................................................................4
DECK VIEWS ...............................................................6
2 DECKS ......................................................................6
DECK INFO ...................................................................7
Before operating this equipment we ask you to carefully study and follow all instructions.
Please remove the Reloop TOUCH from its packaging. Before initial operation please make sure that the device has not been visibly damaged during transport.
If you detect any damage to the power cable or the casing, do not operate the device and contact your specialized dealer.
SAFETY INSTRUCTIONS
CAUTION!
Please exercise particular caution when handling AC 100 - 240 V, 60/50Hz power voltage. This voltage rating may lead to a critical electrical shock! Any damage caused
by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage to property or for personal injury caused
by improper handling or non-observance of the safety instructions.
1.
This device has left the factory in perfect condition. To maintain this condition and to
ensure a risk-free operation the user must observe the safety instructions and warnings
contained in this operation manual.
2.
For reasons of safety and certification (CE) the unauthorized conversion and/or modi-
fication of the device is prohibited. Please note that in the event of damage caused by
the manual modification to this device any warranty claims are excluded.
3.
The inside of the device does not contain any parts which require maintenance, with
the exception of wear parts that can be exchanged from the outside. Only qualified staff
must carry out maintenance, otherwise warranty does not apply!
4.
The fuse must exclusively be exchanged against fuses of the same class, with the same
trigger features and nominal current rating.
5.
Make sure that the power will only be supplied after the device has been fully set up.
Always plug in the mains plug last. Ensure that the mains switch is in the "OFF" position
when connecting the device to power.
6.
Only use cables that comply with regulations. Make sure that all jacks and bushes are
tightened and correctly hooked up. Refer to your dealer if you have any questions.
7.
Ensure that when setting up the product the mains cable is not squashed or damaged
by sharp edges.
8.
Prevent the mains cable from coming into contact with other cables! Exercise great care
when handling mains cables and connections. Never touch these parts with wet hands!
9.
Connect the power cable exclusively to appropriate shock-proof outlets. The only supply
point to be used is a supply outlet in accordance with specifications of the public supply
network.
10. Disconnect the device from the supply outlet when not in use and before cleaning! Be
sure to hold the mains plug by the body. Never pull the mains cord!
11. Position the device on a horizontal and stable low-flame base.
12. Avoid any concussions or violent impact when installing or operating the device.
2
EFFECTS .....................................................................8
DECK EFFECTS .............................................................8
SINGLE FX MODE ..........................................................9
MULTI FX MODE ............................................................9
PADS ...........................................................................10
WAVES ........................................................................10
VIDEO ..........................................................................10
BROWSER VIEW..........................................................11
MINI DECKS ..................................................................11
13. When selecting the location of installation make sure that the device is not exposed to
excessive heat, humidity, and dust. Be sure that no cables lie around openly. You will
endanger your own safety and that of others!
14. Do not rest any containers filled with liquid that could easily spill onto the device or in its
immediate vicinity. If, however, fluids should access the inside of the device, immediate-
ly disconnect the mains plug. Have the device checked by a qualified service technician
before re-use. Damage caused by fluids inside the device is excluded from the warranty.
15. Do not operate the device under extremely hot (in excess of 35° C) or extremely cold
(below 5° C) conditions. Keep the device away from direct exposure to the sun and heat
sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never
cover the cooling fan or vents. Always ensure sufficient ventilation.
16. The device must not be operated after being taken from a cold environment into a warm
environment. The condensation caused hereby may destroy your device. Do not switch
on or operate the device until it has reached ambient temperature!
17. Controls and switches should never be treated with spray-on cleaning agents and lu-
bricants. This device should only be cleaned with a damp cloth. Never use solvents or
cleaning fluids with a petroleum base for cleaning.
18. When relocating, the device should be transported in its original packaging.
19. Devices supplied by voltage should not be left in the hands of children. Please exercise
particular care when in the presence of children.
20. At commercial facilities the regulations for the prevention of accidents as stipulated by
the organization of professional associations must be observed.
21. At schools, training facilities, hobby and self-help workshops the operation of the device
must be monitored with responsibility by trained staff.
22. Keep this operation manual in a safe place for later reference in the event of questions
or problems.
FOLDERS LIST ..............................................................12
FILES LIST ....................................................................12
SIDEVIEW .....................................................................13
SETTINGS VIEW ..........................................................13
DECK SETTINGS............................................................14
WAVES SETTINGS .........................................................14
MAC: ............................................................................15
WINDOWS: ..................................................................15