Troubleshooting - Fisher & Paykel DCS CPU/CPV-484GG Guide D'utilisation

Troubleshooting

20
US
CA
If you can't find an answer to your problem in the chart below, or if the problem cannot be
fixed, you will need technical help. Contact your Authorized Service Center or Customer Care.
Problem
Cooktop burners
None of the burners,
grill, or griddle will
light.
Some burners will not
light.
Flames do not burn all
around the burner
cap.
There is no clicking when
I try to light a burner.
Possible causes
No power supply.
No gas.
Burner parts or ignitors may be
wet, dirty, or misaligned.
The ignitor is dirty or there is a
power outage.
What to do
Check that there is no power
outage in your area and that the
power supply to the cooktop
is switched on at the circuit
breaker panel.
Check that the gas supply to the
house is working. You should
hear the gas when you turn
a burner on. If you are using
bottled gas, check that it is not
empty.
Check that the burner parts
are clean, dry, and correctly
assembled. Check that the
ignitors are clean and dry.
See 'Care and cleaning' for
instructions.
Clean the ignitor(s). See 'Care
and cleaning' for instructions.