Option Adjustments - Fisher & Paykel DishDrawer DD24 Serie Guide De L'utilisateur

Option adjustments

23
US CA
The following options can be adjusted to suit your preferences:
Rinse agent setting
Reduce the Rinse agent setting if there is excess foam after a wash program.
Increase the Rinse agent setting if dishes are wet or streaky after a wash program.
Water softener setting (DD24-H models only)
Refer to the 'Water softener' section.
Auto power setting
By default, DishDrawer® will automatically turn on whenever the drawer is opened. Washing will
not start until the drawer is closed and the button has been pressed. If you do not want the
DishDrawer® to turn on automatically, this feature can be turned off.
End of wash program beeps
By default, DishDrawer® will beep six times at the end of a wash program. This feature can be
turned off.
Closed drawer option
The Closed drawer option will lock the DishDrawer® when the drawer is closed. When you wish
to open the drawer, press the button. When the drawer is fully closed again, the lid will
automatically come down after 30 seconds and lock.
If the Keylock feature is used in conjunction with the Closed drawer option, pressing the
button will not unlock the drawer. The Keylock feature must be turned off to enable
DishDrawer® to be opened.
Note: this option is highly recommended if the DishDrawer is to be used in motor homes.
Clean dish indicator option (models with LCD only)
By default, DishDrawer® is programmed with the Clean dish indicator option off. When the Clean
dish indicator option is on, the symbol will remain in the electronic display after a wash
program has finished to indicate the dishes are clean. When you have unloaded all the dishes,
press the button to return to normal operating mode.
This option might be useful when dishes have been left in DishDrawer® and you cannot
remember if they have been washed or in situations where household members regularly
remove only a few clean dishes without emptying the drawer.
We do not recommend the Clean dish indicator option be used in conjunction with the Closed
drawer option.