Fisher & Paykel DCS CAD1-30 Instructions D'installation Et Guide D'utilisation page 9

INSTALLATION
CART ASSEMBLY INSTRUCTIONS
landing ledge should sit flush on the top of the cart (no gap).
4. Secure the head to rear of cart (Fig. 13) with Phillips-head screws provided (10-24 x 1/2").
Fig. 10
Fig. 13
STEP 4
Front End Screw Installation
1. Install remaining screws (10-24 x 1/2") into the front of head to the cart (Fig.14).
2. Slide drip tray/pan back into place.
Fig. 14
PINCH POINT
Fig. 11
7
Fig. 12