Petsafe Stubborn Dog In-Ground Radio Fence Guide D'emploi Et De Dressage page 9

5A
2
2
3
3
To Set the Correction Level
Read all steps before attempting to set the
Correction Level.
1. Remove the clear plastic cover with a coin to
expose the Correction Level Button (5D).
2. With the battery installed, press the
Correction Level Button and release when
the Receiver LED Indicator Light lights up
(5E).
3. The Receiver LED Indicator Light will
emit a series of fl ashes representing the
Correction Level.
4. Increase the Correction Level by pressing
and releasing the Correction Level Button
within 5 seconds of the previous series of
fl ashes.
5. After setting the Correction Level, replace
the cover to protect the Correction Level
Button.
The Correction Levels increase in strength from 1 to 5. Pushing the Correction Level Button while the Collar
Receiver is on level 5 will cause the Collar Receiver to revert to level 1. Refer to the Function and Response Table to
choose the Correction Level that best fi ts your pet.
The Collar Receiver is equipped to automatically increase the level of Static Correction the longer your pet remains
in the Static Correction Zone if the collar is set at level 2 or above.
The Receiver LED Indicator Light acts as a low battery indicator, fl ashing every 4 to 5 seconds when replacement is required.
Function and Response Table
Indicator Light Correction Level Collar Receiver Function
Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
Flashes once every
4 to 5 seconds
Note: Begin training with Correction Level 2 and only increase if your pet does not respond to the Static Correction.
5B
5D
1 Beep and Vibrate (No Static Correction)
2 Low Static Correction
3 Medium Static Correction
4 Medium High Static Correction
5 High Static Correction
Low Battery
www.petsafe.net
5C
5E
Temperament of Pet
Timid
Timid or Average
Average or High Energy
High Energy
9