Mantis Back Porch ComposTumbler CT08002 Guide D'assemblage page 7

4.3
Back Panel Assembly
Insert the back panel assembly on the other side of
the aerator panel, once again mating the posts on
the edge of the panel with the holes in the endcap.
4.5
Use the Phillips screwdriver, screws
(4a), and fl atwashers (4b) to fasten
the endcap
4.4
Place the other endcap on top of the drum, aligning
the holes with the posts on the panel edges and
aligning the D-hole Vents at the door opening.
4.6
Turn over the drum assembly and
fasten the other endcap with the
remaining screws and fl atwashers.
D-Hole Vents
are Aligned
7