Connections; Tv And Blu-Ray Disc Player Connection - Yamaha YRS-2100 Mode D'emploi

Connections

• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal.

TV and Blu-ray disc player connection

For the cable connection, follow the orders below.
1
HDMI cable
(optional)
Input the digital audio/
video signals of the Blu-
ray disc player to this
unit.
To AC wall outlet
1
2
1
Video signals
Audio signals
y
1)
Audio return channel (ARC) supported TV
• Connect HDMI cable to audio return channel supported terminal (the
terminal with "ARC" indicated) on TV. In this case, you do not need
to connect optical cable.
• Activate the HDMI control function of this unit (☞p. 39).
8
En
2
HDMI cable
(optional)
The digital video of the
Blu-ray disc is reflected
on TV.
HDMI
OUTPUT
Blu-ray disc player
2 3
OPTICAL
HDMI INPUT
OUTPUT
3
Optical cable
(supplied)
Play back digital sounds
of TV on this unit.
2)
3
1) 1. Remove the cap
2. Check the direction of
the plug
R AUDIO L VIDEO
INPUT1
INPUT2
(Example)
What is audio return channel (ARC)?
A function transmits digital audio signal output from TV to this unit
through a HDMI cable. By this function, a digital audio pin cable to
connect TV and this unit is not needed.
y
2)
Depending on the setting, HDMI for video signal and optical digital
audio, coaxial digital audio or analog audio for audio signal can be
selected. Refer to "Input assignment (☞p. 38)".
4
Video pin cable
(supplied)
To display the YRS-
2100/YRS-1100's setup
menus on the TV.
4
TV