Stiebel Eltron EAC 5 Notice D'utilisation Abrégée page 32

MENU: OPERATION
Holiday program
Operation
The holiday program allows to define a special heat level for a period of absence. The settings
include start of holiday, end of holiday and desired heat level.
The holiday program overrides the active week program, i.e. it puts the running week pro-
gram out of operation. After the period of absence, the week program that was previously in
use is re-activated.
How to set up the holiday function on the controller:
Menu > Operation > Holiday program
1. Select
2. The Start of holiday screen is displayed.
Chng
3. Press and set the desired start point using the
Save
keys (+ und -). Press
. The End of holiday screen is displayed.
4. Press Arrow down
Chng
5. Press and set the desired end point using the
Save
keys (+ und -). Press
. The Heat level holiday screen is displayed.
6. Press Arrow down
7. Press Chng and set the desired control mode for the holiday period using the
Minus
keys (+ und -).
Save
8. Press .
 Now, the holiday function is automatically activated. At the selected start point in
time, the desired operating mode is activated and will be de-activated again at the se-
lected end point in time.
12 | EAC 5
.
.
Arrow
.
Arrow Plus
key > and the and
Plus
key > and the and
Plus
Minus
Minus
and
www.stiebel-eltron.com