Stiebel Eltron EAC 5 Notice D'utilisation Abrégée page 30

MENU: OPERATION
Active week program
Operation
Selection of the active week program for the automatic heat level adjustment through time and day of week. A week pro-
gram allows to define which heat level should apply at which time within the week. Week program 1 is defined as the factory
setting. The four available week programs may be modified as required. Times can be changed in steps of 15 minutes.
A fully programmed entry consists of:
 Switch time: point in time at which the change to the new operating mode shall occur (e.g. 06:00)
 Switch action: value of the new heat level
 Day assignment: definition of the days for which this entry shall be effective (e.g. Mon, Tue, Thu, Fri)
How to select the active week program:
1. Select Menu > Operation > Active week program
2. Press Chng .
3. Select the desired week program using the
Save
4. Press .
 The new week program is made effective.
10 | EAC 5
.
Plus Minus
or keys (+ or -).
www.stiebel-eltron.com