Stiebel Eltron EAC 5 Notice D'utilisation Abrégée page 29

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Heat level manual
Operation
Heat level manual is used to set the desired target room temperature in the operating mode "Manual". The heat level can be
set to any value between 1.0 and 5.0 or to frost protection. In a normal, properly tuned installation a heat level of 3.0 results in
a target room temperature of 20 °C.
Unless the parameters of the target room temperature have been defined differently by the installer, an integer difference in
the heat level (e.g. between 3.0 and 4.0) corresponds to a temperature difference of 2 K. For frost protection, a target room
temperature of 10 °C is defined in the factory settings.
How to set the heat level on the controller:
1. Select
Menu > Operation > Heat level manual
Chng
2. Press
.
3. Set the desired heat level using the
4. Press
Save
.
 The new heat level is made effective.
Note: In heating installations with electrical storage heaters, a week program for charging is reasonably applicable only if the
charging shall be reduced for entire days within a week. Examples are weekend homes which should get the normal charge
only from Friday to Sunday, or offices where the charging should be reduced from Friday evening to Sunday evening.
www.stiebel-eltron.com
.
Plus
Minus
or
keys (+ or -).
MENU: OPERATION
EAC 5 | 9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Systectherm eac 5

Table des Matières