MENU: OPERATION
Operation
Operating mode
Operation
operating modes are available:
Standby:
Frost protection only
Manual:
Heat level manually adjustable on the controller from 1.0 to 5.0 and frost protection
Automatic:
Heat level is automatically time-controlled by the system as per active week program and holiday program,
respectively.
In the factory setting for a self-learning charging model the charging is done in the operating mode "Automatic" with a cor-
responding week program (factory setting: program 1, heat level 1 from 22.00 to 06.00 h and heat level 3 from 06.00 to 22.00
h). This ensures a self-learning optimisation also for release times of 8+0 or 8+2 and you achieve a corresponding night-time
set-back .
If the "Classic" charging model has been selected, the operating mode should be set to "Manual".
How to select the operating mode on the controller:
Menu
Operation
1. Select
>
Chng
2. Press
.
3.
Select the desired operating mode using the
Save
4. Press
.
The new operating mode is made effective.
8 | EAC 5
Operating mode
>
.
Plus
or
Minus
keys (+ or -).
www.stiebel-eltron.com